JV5-320DS Large Format Direct Sublimation Printer
JV5-320DS series offers digital print companies and signmakers a super wide solution for direct printing onto polyester based materials, such as flags, banners, and other soft signage. The Mimaki JV5-320DS prints high quality graphics at high speeds up to 60.3 sqm/h.
JV5-320DS delivers •••
- Direct printing or transfer printing is possible: ink catcher allows for direct printing on pretreated fabrics
- Large format printing up to 3.2 m width
- Spray Suppressor System to enhance consistency and quality
- Automatic Media Feeder (AMF) for stable feeding of heavy media up to 130 kg
- Nozzle Checking Units (NCU) enable savings and avoid extensive waste (optional)
- Unattended continuous printing with Uninterrupted Ink Supply System (UISS) and Mimaki Bulk Ink System (MBIS)
Specifications of JV5-320DS
|Print head||On-demand piezo head (array of 4 staggered print heads)|
|Maximum print width||3250 mm (textile printing), 3290mm (paper printing)|
|Printing resolutions||540, 720, 1440 dpi|
|Ink type||Sb52 dye sublimation ink (BL, M, Y, K, NK, LBL, LM)
Sb53(Sublimation transfer ink) BL / M / Y / K / LBL / LM
|Ink capacity||440 ml cartridge, 2000 ml ink pack|
|Media width||297 mm – 3300 mm|
|Roll weight||Up to 130 kg|
|Roll inside diameter||3 inch|
|Media heater||Pre-heater, post-heater|
|Power consumption||Less than 7200 VA|
|Dimensions (w x d x h)||5170 mm x 1610 mm x 1640 mm or below|
|Weight||1200 kg or below|
Features of JV5-320DS
Differences between direct and transfer printing
This method enables direct printing on pretreated polyester using dye sublimation inks and post-treatment heating in order to achieve the highest quality and bright vivid colours. Transfer paper is not needed, saving costs especially when longer runs are printing.
Sublimation transfer printing
In dye sublimation transfer printing, the image is printed onto transfer paper. After printing, a heat press or a calendar is needed to fix the image onto the substrate. The advantage of transfer printing is the high quality and durable output for both polyester based materials and hard substrates.
Depending on print conditions, the JV5-320DS is capable of printing up to 60.3 sqm/h
Unattended continuous printing
Uninterrupted Ink Supply System (UISS)
When one ink cartridge runs out, another cartridge of the same colour begins supplying ink. A maximum of 1760 ml ink per colour can be loaded at once. Ink cartridges can be changed during printing and unattended overnight continuous printing is possible.
Mimaki Bulk Ink System (MBIS) – optional
The bulk ink system is an eco-friendly ink system that produces less waste while achieving continuous printing. It uses 2-litre ink packs and achieves as stable and reliable ink ejection as printing solely with cartridges. It is possible to use both 2-litre ink packs in combination with regular 220/440cc cartridges.
Take-up and feeding device
JV5-320DS enables secure and accurate feeding of heavy media up to 3250 mm width and up to 100 kg weight. The machine incorporates a tension bar to maintain constant media tension. In addition, a take-up device for adjusting take-up tension is included. Thus, both heavy and less wide media can be used with ease.
- Automatic nozzle drop-out detection (optional) monitors ink-discharging state from print head and ink clogging is quickly detected and cleaned, saving the waste of media and ink.
- At high print speeds an additional ventilation fan on the large format printer supports drying of the media thus enabling rewinding.
- USB2.0 interface supports high-speed data transfer.
- A small take-up device which can adjust take-up tension is supplied. Even narrow media can be taken up without using a shaft.
Downloads of JV5-320DS Series
Please download the Mimaki JV5-320DS Series brochure below.
Product images of the JV5-320DS