Amsterdam, January 29, 2015 Mimaki has attained the OEKO-TEX® accreditation for direct skin contact for its textile decoration technology using Sb300 series dye sublimation inks and Sb53 sublimation transfer inks. The OEKO-TEX® criteria catalogue provides manufacturers in the textile and clothing industry with a scientifically based standard benchmark for the evaluation of potentially harmful substances […]
Answer: please see the following. 1) Install pinch roller in-between of the “pinch-roller guide mark”. 2) Adjust the clamp pressures to equalize the pressures on right half and left half. * The pinch roller may leave the roller track on some types of media. Adjust and apply right pressure to your media. 3) If […]
Answer: see the following. [Printing data with registration mark] 1. Check the following items in both FineCut and RasterLink settings. 1) If printing from FineCut, make sure to click on [Detect Mark] button. 2) If printing from either of FineCut or RasterLink, select [4 points] for search position of registration marks for […]
Please see the following. When setting up media, and pulling out a certain length of the media, the roll stopper functions and the roll holder temporally gets secured, allowing you to setup the media more evenly. If the roll stopper does not function, checkup the following items to figure out if the roll holder is […]
Please see the following. 1. The error is showing because each heater temperature does not reach the printer setting temperature. It performs printing operation within the ±2℃ range of the setting, thus wait until the heater reaches the temperature. (The heater lamp turns green when it reaches the setting). The orange light […]
Please see the following. The error message urges you to replace the wiper ASAP. Perform [WIPER REPLACE] under the MAINTENANCE menu when replacing the wiper. Please refer to the Operation Manual to replace the wiper. Even after you replaced the wiper, yet not performed [WIPER REPLACE], the error “Replace a WIPER” is still showing. This […]
Please see the following. Two types of ink are installable: Solvent ink and water-based ink. You can install one kind at a time. See the further details on ink at [Characteristics of Ink]. [Solvent Ink] *SS21 Ink *ES3 Ink [When does ink expire?] To keep the print quality at its best, there is an ink […]
Answer: please see the following. [In Print Mode] Ex.) When setting up the 1300mm-width media on CJV30-130 with 6 pinch-roller operation. – Setup all the pressures in M (Middle). * Make in-between pinch roller distance equivalent to ensure smooth feeding of the media. [Important] The pinch rollers may leave the roller tracks on certain types […]
Answer: please see the following. Setup [Heater Standby] and [Heater OFF] in the heater temperature settings. * The information on this note is valid only for print operation. Set up the timer for the heater to reach the preheating temperature in [Heater Standby]. The preheating temperature is less than 3-5℃ lower than the normal heating. […]
Mimaki scores Viscom Best of 2014 Award for Two Class Leading Solutions Amsterdam, November 20, 2014 Mimaki is delighted its portfolio of solutions is continuing to collect industry accolades. Viscom has recently presented the company with a Best of 2014 Award in the Large Format Printing category to not one, but two, Mimaki solutions – […]
