Answer: This error may occur under the overload due to clogged air filter of the optional vacuum unit, or at the maximum vacuum strength volume of 65. 1. Turn off the main power supplies of the main unit and vacuum unit, and then remove and clean the air filter. Cleaning procedure ① Remove the air […]
Answer: Please check the following contents. The following is an example of daily workflow. More details of each step are described on the next page. 1.Before printing ① Shake the white ink cartridge daily and reinsert it into the ink slot. [How to shake] Wear gloves and apply cloth to the insertion side as shown […]
Answer: This error occurs when the table does not operate normally. 1. Make sure the table is moving up & down. 2. Check if there is strange noise around the table. 3. The weight of media must be 5kg or less (including jig) by specifications. Check that the weight of the media mounted on the […]
Answer: This error is displayed when the obstacle sensor detects an obstacle that can collide with the head. Check that the setting value of “MEDIA THICKNESS” or “HEAD GAP” is appropriate against the actual thickness of the media. In addition, check on the followings: ・Dust or garbage is not sticking to the surface of table […]
Answer: The following two filters are placed on the carriage. • LED UV unit filter (SPC-0657) … Protects the UV lamp unit from dust or dirt. • Mist adsorption filter (SPC-0656) … Adsorbs ink mist during printing to prevent the nozzle surface (ink discharging surface) from getting dirty with ink. If the filters get dirty, […]
Answer: This error is displayed if data other than command data is received. 1. Reprint with different color profiles. 2. Check if there are some damages on the USB cable. [For UJF-3042HG] Check that the accompanying ferrite core is attached to USB. If not, attach it. 3. Replace the USB cable to other one. ・Use […]
Answer: Please see the followings: 1. After completing printing, you can set whether to return to Local mode or to remain in Remote mode. For how to set it, see “OPERATION MANUAL” -> “Chapter 3” -> “Various settings” -> “Setting the work change”. When [OFF] is set: Keeps Remote mode after printing. […]
Answer: Recommended speed mode is as follows: 720 X 900dpi 12pass / 1,440 X 1,200dpi 16pass is recommended. [For LF-140 ink with UJF-3042FX / UJF-3042HG] When using light colors with LF-140 ink, 1,440 X 1,200dpi 16pass is recommended. * When using the IJ primer PR-100 with UJF-3042FX/UJF-3042HG, set the number of pass as 24 or […]
Answer: Put in the value directly. * Recommended gap is 1.5mm (.015 inch). ・If the head gap is changed, table height is also changed. ・UJF-3042 is equipped with a function [GAP CHECK]. When ON is selected: If an obstacle is detected before or during drawing, the table automatically moves down away from the obstacle. * […]
