Go back

How to turn the heater off after nightly unattended printing?

It is recommended that you set AUTO Power-off or drying time to reduce the heater temperature.

【AUTO Power-off】
After the machine has been idle for the specified period of time, it is turned OFF. We recommend this setting for the purpose of energy conservation.

This feature sets the drying time for each scan and the ink drying time after the end of print. If you set the drying time for the “end of print,” the heater temperature is kept for the specified period of time after the printing completes and then gradually decreases. If you set the heater temperature to more than 40°C, it is first cooled to 40°C, and then reduced by 1°C every five minutes, so that it can be increased again quickly when the next data is sent. For details about settings, see “Operation Manual.”