Multifunctional

The Cf3 series incorporates three exchangeable head types (router head, tangential head or reciprocating head) which allow for cutting a wide range of materials. Switching heads can be done relatively quick. Other tools, such as  swivel cutter, pen tool, and creasing tool, are also available.

Three models: router model

Rigid materials, such as acrylic and aluminium, can be cut with a high speed spindle. The router model is especially suitable to cut: rigid and thicker materials (see also suitable cutting materials and applications).

Specifications:
- Spindle speed : max. 60,000 rpm
- Max. tool diameter : 6 mm
- Tool chuck / clamp system : collet type
- Max. cutting depth : 5 cm (depending on material)

Three models: tangential model

The tangential cutter steers the blade as it cuts. The motor controlled blade lifts and turns to start every cut at the exact angle. Both half and die cutting is possible. Various materials, ranging from soft to ridged, can be cut. The cutting capabilities and cutting depth depend on the type of material. Any suitable blade available in the market can be mounted (see also suitable cutting materials and applications)

- Vertical tool force: low pressure head - 300g, 1500g
                                 high pressure head - 1000g, 5000g

- Tools: tangential cutter, swivel cutter / pen, creasing tool

- Max. cutting depth: 1 cm

Three models: reciprocating model

A reciprocating cutting system is characterised by the up-and-down movement of the cutter blade in addition to tangential cutting. The reciprocating cutter is especially suitable to cut corrugated board, cardboard and foam materials. Creasing tools are available to produce creases in cardboards and corrugated boards. You can also cut materials that can be cut with the tangential model.

Specifications:
- Max. reciprocating speed: approx. 10,000 strokes / min.
- Stroke: 1 mm (depending on cutter and holder)
- Tools: reciprocating cutter, swivel cutter / pen, creasing
   tool, high pressure tangential cutter
- Max. cutting depth: 2 cm (depending on cutter and holder)

Colour photo sensor

The patented Mimaki colour photo sensor reads registration marks that are printed on the media to enhance precise contour cutting of complex shapes. More precision is obtained by automatic correction of alignment and distances between the cutting data and the output. The light pointers can also be used to precisely position the media on the table.

Air system with vacuum and blower function

The CF3 series incorporates an air system with a vacuum and blower function. The media is firmly held by the vacuum function. The blower function ensures easier positioning of heavy media. The vacuum area is divided into zones, 6 for the CF3-1631 and 2 for the CF3-1610. The zones can be separately activated to suit the media size.

The air system is also a feature of the JF series UV curable flatbed printers.

Automatic table surface cleaning

Cleaning the table surface is essential for the router to run smoothly. The automatic cleaning function selects the area to be cleaned from a total of 8 sections (both models). This feature enhances reliability and saves post cutting labour costs.

Effective print and cut combo

The CF3 series is available in two sizes, which are the same as JF series. CF3 and JF series therefore deliver a true print and cut workflow. It is the ideal cutting solution for small runs of industrial production and for all kinds of signage.

Related products

For the print and cut solution >>

For direct printing on smaller substrates >>

For roll type cutting plotters >>